Singamas Qingdao Factory Directly Produce and Sell 20ft Open Side Storage Container

Product Detail

1.Transportation

The container will be constructed to be suitable for transportation in normal operating conditions by modes of:

A.  Marine - on deck or in cell guided by vertical or diagonal lashings

B.  Rail - on flat or container car secured at its bottom corner castings

C.  Road - on flat or chassis secured at its bottom corner castings

2.Corner Protrusions

2.1 The faces of the bottom corner castings protrude from lower faces of all transverse members in the

base of the container by 17 MM (+0.5, -6.0 MM).

2.2 The upper faces of top corner castings protrude from upper faces of the highest point of the roof by 6 MM.

2.3 The outer side faces of corner castings protrude from outside faces of corner posts by 3 MM.

2.4 Under 1.8 x max. gross weight no part of the base will protrude more than 6 MM below the bottom corner castings.




TYPE			22G4
Extermal			Side Door Opening		Allowable Stacking Weight
Length	Width	Height	Width	Heigh	60,000 Kg	132,280 Lbs
6,058 mm	2,438 mm	2,591 mm	2,438 mm	1,828mm	Cubic Capacity
20'	8'	8’-6”	8’	6’	32.5 cu.m	1,150 cu.ft
Internal			Weights
Length	Width	Height	Max Gross Weight	Tare Weight	Max Payload
5,954 mm	2,284 mm	2,393 mm	6,720  Kg	1,720 Kg	5,000 Kg
19’-6 13/32”	7’-5 59/64”	7’-10 7/32”	14,810 Lbs	3,790  Lbs	11,020 Lbs




Special Feature

1.Two roller shutter doors on one side.

2.Two special ventilators on opposited side.

3.Comply with ISO1161 and ISO 668, easy for transportation. 






PACIFIC CONTAINER, one of the largest manufacturers and suppliers in China, is equipped with the most advanced equipment and technology. And catering to your special requirement, our factory also offer you the customized service. Welcome to buy the singamas qingdao factory directly produce and sell 20ft open side storage container with us.